The Dimmer pack E1550D/6X3KW
(6 channels 3000W/channels) is of compact and robust construction using DMX and analogue technology.
It combines high quality and reliability. The unit is designed for 19” rack ounting for fixed installations or touring racks. The high quality interference suppression filters make the unit ideal for use in studios, clubs, theatres etc. Normally, it is supplied with double schuko output sockets, but it can also be ordered with different sockets
(see figure).
The dimmer pack can be controlled either with analogue input 0/+10V or with DMX-512 (1990). The user has the capability of selecting whether the dimmer will hold or blackout the last DMX-512 data in case of failure of serial connection. The unit has four factory set chasers with capability of selecting the dimmer level and the speed.
The DMX-512 address can be selected through 3-digit selectors mounted on the front panel. There are two led indicators designating the correct or false condition of the Digital Serial input. The power supply is connected on a 5-pin CEE 5X32A heavy duty male socket.

The Dimmer Pack E1550D/12x3KW
(12 channels 3000 W/channels) is of compact and robust construction offered at a very competitive price. It combines high quality and reliability.
The unit is designed for 19” rack mounting either in fixed installations or touring racks.
The dimmer pack can be controlled with
DMX-512 (1990). The unit has four factory set chasers with capability of selecting the dimmer level and the speed. The DMX-512 address can be selected through 3-digit selectors mounted on the front panel. There are two leds indicating the correct or false condition of the Digital Serial input.
The power supply is connected on a 5-pin CEE 5X63A heavy duty inlet.The 5-pin CEE 5X63A connector is supplied with the dimmer. The dimmer can be supplied with the following outlet sockets: Schuko, French, Danish, Neutric Power Connectors, Wieland ST 18/3, Harting, Socapex.

FEATURES OF E1550D/12X3:
• Suitable to control incandescent lamps, iron core transformers for low voltage incandescent lamps, resistive and inductive loads.
• Hard firing to ensure proper triggering.
• 12 Output led monitors.
• 3 Input led monitors.
• Circuit breakers MCBs.
• DMX 512 in/out (XLR 5pin connectors).
• Indication of DMX “Fault” status.
• Selectable start address.
• DMX signal buffer.
• Holding of last DMX value.
• Rack mounting 3U.
• CE approved. Complies with all European Mandatory LVD and EMC
regulations.

The Dimmer Pack E1550DC/6X3KW
(6 channels 3000W/channels) is of compact and robust construction using DMX and analogue technology.
It combines high quality and reliability.
On the front panel of E1550DC there are six preset sliders and one master control. The unit is designed for 19” rack mounting in fixed installations or touring racks.The high quality interference suppression filters make the unit ideal for use in studios, clubs, theatres etc. Normally, it is supplied with double schuko output sockets, but it can also be ordered with different sockets (see figure). The dimmer pack can be controlled either with analogue input 0/+10V or with DMX-512 (1990).
The user has the capability of selecting
whether the dimmer will hold or blackout the last DMX-512 data in case of failure of serial connection.
The unit has four factory set chasers with capability of selecting the dimmer level and the speed.The DMX-512 address can be selected through 3-digit selectors mounted on the front panel. There are two led indicators designating the correct or false condition of the Digital Serial input. The power supply is connected on a 5-pin CEE 5X32A heavy duty male socket.

The Dimmer pack E1550DC/6X5KW CEE
(6 channels 5000W/channels) is the new model of the E1550DC series.
It combines high quality and reliability.
On the front panel of the Dimmer Pack there are six preset sliders and one master control. The unit is designed for 19’’ rack mounting either in fixed installations or touring racks. The high quality interference suppression filters make the dimmer pack ideal for use in studios, clubs, theatres etc. It is supplied with six CEE 3X32A output sockets and one CEE 5X63A plug for power supply.
The dimmer can be controlled either with analogue input 0/+10V or with DMX-512 (1990). The user has the capability of selecting whether the dimmer will hold or blackout the last DMX- 512 data in case of failure of serial connection. The unit has four factory set chasers with capability of selecting the dimmer level and the speed. The DMX- 512 address can be selected through 3-digit selectors mounted on the front panel.

The SPLITTER 142 is the ideal tool for splitting and buffering the DMX-512 signal. The splitter is configured with one 5pin XLR input with terminate on switch and LED, one 5pin XLR output to connect other splitters in daisy chain, Data LED, four optically isolated (standard DMX) 5pin XLR outputs and two optically isolated 3pin XLR outputs with reverse polarity buttons.
The internal PCB carries spare ICs for fast emergency service.
The SPLITTER SP 142 is designed to be mounted on a standard 19’’ Rack (1U) but it can also be used as a desktop unit.