| |
|
|
LPS-SMALL
LINE SL SHOWLASERSYSTEM
|
| |
For
Installations in clubs with about 100-250m2 permises where
no bigger and more powerful laser systems can be used
LPS
Small Line have been
designed. The user friendly LPS
SL Controller has
been developed only for this system and assist the professional
work of the light jockey.
You can install 4 systems synchronous by 1 LPS
SL Controller.
Those systems can be installed at the same time or in
succession. That means that you can upgrade your installation
from one system to four.
Technical
specifications:
5-fold
optical bench,
1 x Open Loop X/Y Scanner
1 x Lissajous-Scanner
3 x spectral effects (1x line grating, 1x grid grating,
1x cross grating)
Completely fitted with power supply and 230 V
Connector, with bow to hang up.
Measures: 550mm x 400mm x 150mm
LPS-SL Controller,
5 x beam buttons,
Flash and hold function,
Sound to Laser,
Automatic effects (rate changeable),
59 different effects, which can be
shown by the X/Y Scanner
1 x Lissajous-Scanner, for tunnel effects
3 x spectral effects
1 x LCD Display
19", 4HE, with key switch and emergency off button.
LPS-Small-Line with 100mW, DPSS Laser, green.
100 mW Nd:YAG diode pumped laser, 1.6 mm beam diameter,
1.2 mrad divergence,
532nm wave length green colour, temperature stabilized,
incl. 12 V power supply
And 50mW red Laser module
Air-cooled system, no water!!!
|
 |
|
|
| |
|
| |
LPS-MEDIUM
SL SHOWLASERSYSTEM
|
| |
After
large scale but interesting research and development work,
we are proud to introduce you to our LPS
Medium as the most
suitable solution for premises between 250 and 400 m2.
With high quality components, your light jockey can use
pre-programmed features right from the beginning from
our special configured LPS
Medium Controller.
Intensive practical training by our experts allows him
after a very short time to do changes at the pre-programmed
animations in real time. Moreover there is the possibility
to show space animations and laser beams simultaneously.
This way your premises will be spatially occupied and
your customers will be satisfied like you have never seen
before.
Technical
specifications:
1W DPSS laser, diode pumped, 2 mm beam diameter,
1.5 mrad divergence ,
532nm wave length green colour, temperature stabilized,
incl. 230 V power supply
12 fold bench:
7 beams with fine adjustable mirrors
4 spectral effects ( 1 line standing, 1 line rotating,
1 cross rotating, 1 line-cross rotating),
1 x Scanning
Hit proof laser glass,
Dust proof aluminium case,
Completely mounted and equipped,
Power supply for actuators and effect gratings,
Measures: 1150 x 600 x 280mm
X/Y- Real SCAN, Cambridge CT 6800, closed loop
galvanometer for space and graphic shows, 40° angle,
incl. driver electronic and amplifier
1 x Medium-Controller, for the 12- fold optical
bench, sound to laser, all beams,LCD - display, 22 buttons
for real-time changes, moving, zooming, rotations,59 animations
which can be changed in real-time, hold, flash, Joy-stick,
zooming-slider scrolling text generator, emergency off,
key switch, 19",7HE
4
x SHR SPACE-Mirror
2 x SHR-Grid
4 x SHR-Line
Air-cooled
system, no water!!!
|
|
|
|
| |
|
|
LPS-SMART-LINE
SL SHOWLASERSYSTEM
|
| |
For
installations in discotheques, wich want to present an
excellent laser but for bargain price, our LPS
Smart Line has been developped.
In several different entetainement centers of more than
400 m2 LPS Smart
Line enchants a lot of customers.
Like all LPS show
laser systems, LPS
Smart Line is also
made of high quality components, wich are special selected
and manufactured by us.
Therefore your light jockey right from thr beginning a
multitude of preprogrammed features like tunnels, triangles,
morphings, manual changes of colours and much more.
Because of our own developement of the LPS animation computer
as well as the animation software LPS RealCad LT, there
will be nearly no limits for your light jockey when programming
animations for LPS
Smart Line. |
|
|
|
Technical
specifications:
1 x Laser case, dust proof aluminium case,
Completely mounted and equipped, incl. power supply
for PCAOM III Colour control,
Entirely connected for 1 x X/Y Real SCAN and PCAOM III
Color control,
Suitable for water-cooled lasers up to 10W.
Measures: 1560 x 410 x 260 mm
1
x X/Y Real SCAN Projector, safety projection head
for space and graphic shows with scanner safety and
shutter. Graphic scanner with 2 x CT 6800, 80°,
amplifier electronics.
1
x PCAOM III Color control, temperature stabilized,
for 16,7 mio. Colours. PCAOM-Modulator with electronically
amplifier, 8 channels, automatic blanking.
Complete with cables and modulator holding device.
|
|
|
1
x REALCAD LT Animation software
With 15" TFT screen, hard disk, 16 bit-D/A-converter
card and mouse, 19" housing
Consisting of 2 single programs, it allows all possibilities,
which are required to program and to present a space or
graphic show. By REALCAD program, which includes import
filters for BMP picture files,
3D pictures can be drawn, coloured and scaled.
Creating of complex animations allows the luxurious animation
software RealTime LT, which also includes further features
like automatic drawing, clipping, morphing, wave modulation,
and so on.
As many buttons as needed, but up to 59 animations each,
can be occupied by control software.
Incl. Midi Keyboard for live using!!
Includes 10 Timecode-lasershows with music. |
|
|
1 x space mirror set, (4 x grid gratings, 4 x line
gratings, 6 x reflection mirrors) |
|
|
|
| |
|
|
LPS-EVENT
SL SHOWLASERSYSTEM
|
| |
Our
LPS Event
can be emphasized an absolute eye catcher and darling
of the public. Therefore it will be used more successfully
for each kind of entertainment centre and event.
Expertly equalized high quality components allow you to
work efficiently and more professionally. Pre-programmed
features and Time Code Shows as well as prompt change
of simple animations into most sophisticated real-time
outputs will amaze your customers.
You can choose on your own if you want to show animations
with one or both projectors. Among animations, you can
choose to do beams manually or automatically at the same
time.
By using the LPS Lasercontroller
IV you can change animations during the output,
as you like. |
|
|
|
Technical
specifications:
16-fold Optical Bench: with 5 spectral effects
(1 line grating transmission standing,2 line gratings
transmission rotating, 1 grid grating transmission rotating,
1 line-grid grating transmission rotating), 6 colours
additional (cyan, magenta, red, green, blue, yellow)
16 beams with X/Y fine adjustable mirror blocks, hit
proof laser glass, dust proof aluminium case,Completely
mounted and equipped, incl. power supply for actuators
and effect gratings,Entirely connected for 2 x X/Y Real
SCAN Projector and PCAOMIII Color control,Suitable for
water-cooled lasers up to 10W.
Measures: 1760 x 610 x 360 mm
|
|
|
2 x X/Y Real SCAN Projector, safety projection head
for space and graphic shows with scanner safety and shutter.
Graphic scanner with 2 x CT 6800, 80°, amplifier electronics.
|
|
|
1 x PCAOM III Color control, temperature stabilized,
for 16,7 mio. Colours. PCAOM Modulator with electronically
amplifier, 8 channels, automatic blanking. Complete with
cables and holding device. |
|
|
1
x animation computer RealCAD Pro VI
With 15"Flat screen, hard disk, 16 bit-D/A-converter
card and mouse, 19" housing
Professional 3D-Software to create space and graphic shows,
more than 95 order for moving, clipping, fading, xyz-rotation...Direct
output when drawing and animating pictures at screen and
laser. 16,7 mio. Colours, (colour scale), import filters
for BMP picture files, Time code programming,
Scrolling text generator, with several types and special
functions. Picture catalogue including pre-programmed
pictures and 20 complete laser shows. |
|
|
1 x LPS-Laser controller VI to control optical bench
and software,
59 animations and 16 beam buttons for free choosing, multi
function, 16 slide controllers to mesh in to the laser
show during output, rotations of all axes, changing of
positions of all axes, Zooming up, Zooming down, Zooming
up/down, angle changing in all axes, moving in X/Y axis,
LCD-Display, Sound to Laser> either animation or beams
or both together,
All Beams, Fast and Slow, 19" 8HE case with dimmable
desktop lamp and Emergency-OFF button |
|
|
1
x space mirror set: (6 x grid gratings, 6 x line gratings,
12 x reflection mirrors)
|
|
|
|
| |
|
|
LPS-BIG
ROCK SHOWLASERSYSTEM
|
| |
Do
you want to present in you big discotheque something special
and exceptional regarding laser? In that case LPS
Big Rock should not
be missing from this venue.
You can fully enjoy the marvellous 3D projection in premises
from 600 m2 and up.
High quality components will give your object an exceptional
unparalleled expression. There will be no limits to create
and realize your own ideas. Right from the beginning you
can work like a pro when using our pre-programmed features
and Time Code Shows. After a short time, you can create
your own animations and complete shows.
You can choose to show animations by one, two or all of
the four projectors. In this configuration you can choose
for the projectors synchronous or different outputs. When
operating with our LPS
Laser Controller VI,
you can change outputs, as you like.
|
|
|
|
Technical
specifications:
1 x Coherent Pure Light Star II LD/R, maximum power
5.5W, water-cooled mixed gas ion laser, metal ceramic
tube, power supply, RGB-Optics, SMIR-Technology, remote
control, search and peak, transformer
1
x Coherent Star II A6, maximum power 10W, water-cooled
Argon ion laser, metal ceramic tube, power supply, GB-Optics,
SMIR-Technology, remote control,
Search and peak, transformer
|
|
|
16
fold OB: with 5 spectral effects (1 line grating transmission
standing,
2 line gratings transmission rotating, 1 grid grating
transmission rotating, 1 line-grid grating transmission
rotating), 6 colours additional (cyan, magenta, red, green,
blue, yellow)
16 beams with X/Y fine adjustable mirror blocks,
Hit proof laser glass, dust proof aluminium case,
Completely mounted and equipped, incl. Power supply for
actuators and effect gratings,Entirely connected for 2
x X/Y Real SCAN Projector and PCAOM III Colour control,Suitable
for water-cooled lasers up to 10W.
Measures: 1760 x 610 x 360 mm |
|
|
|
2
x X/Y Real SCAN Projector, safety projection head
for space and graphic shows with scanner safety and
shutter. Graphic scanner with 2 x CT 6800, 80°,
Amplifier electronics. for satellite use.
2
x X/Y Real SCAN Projector, safety projection head
for space and graphic shows with scanner safety and
shutter. Graphic scanner with 2 x CT 6800, 80°,
Amplifier electronics. For bench use.
2
x PCAOM III Colour control, temperature stabilized,
for 16,7 mio. Colours. PCAOM Modulator with electronically
amplifier, 8 channels, automatic blanking.
|
|
|
|
1
x animation computer REALCAD Pro VI
1 x ANICOM SLAVE, Slave for different output
for the other 2 scanners.
Professional 3D-Software to create space and graphic
shows, more than 95 orders for moving, clipping, fading,
and xyz-rotation...
Direct output when drawing and animating pictures at
screen and laser. 16,7 mio. Colours
(Colour scale), import filters for BMP picture files,
Time code programming,
Midi-able, up to 4 scanners are separately controllable,
picture catalogue including ca. 1000 pre-programmed
pictures and 15 laser shows with music.
2
x High Transmission fibre optics, 50m fibre optic
incl. in and output optics and mechanics.
1 x mirror set: (12 x reflexion mirrors, 6 x effect
mirror line, 6 x effect, mirror cross
|
|
|
|
|
|
|
| |
|
|
|
