This 4 channels DMX 512 dimmer pack can be easily recessed, hung up, or even wall mounted, thanks to its versatile hanging or rigging points, its carrying handle, and its sensible weight. Its applications are many, and its markets numerous: tourism, small and medium service companies, discotheques and DJ mobile shows, multi-points installations, and so on.

Technical Specifications:
DMX 512 4 channels dimmer pack. Power 5 A. Total maximum load: 20 A. Full-light test and preheat control for each channel. 16 internal programs. DMX individual addressing for each circuit (softpatch). Functions: manual dimmer, manual program, auto program, hold sound, programmed sound, auto sound. Sound activated. DMX 512 input & output via 3 pin XLR male & female chassis plugs. Black-out remote control thru 6.35 jack socket, 4 power outputs on VDE chassis plugs. Cooling guaranteed via natural air convection. Power supply: 230V 50Hz.

The biggest unit in the Elite dimmer range, the DMPX 615 hosts 6 channels 0f 15A maximum per channel with price in mind, although its innovative digital control exceeds the features of many much more expensive competitors. It has the unique feature of an auxiliary DMX input, triggering internal memories and sequences in case of main DMX input failure. These sophisticated integrated functions open all kinds of markets for this remarkable unit, including museums, exhibitions, professional fairs, and many more applications. The DMPX 615 is also available in a turnkey rack, pre-wired in harting, socapex, PC standards.

Technical Specifications:
6 channels DMX 512 dimmer pack. 15 A each channel for a total of 90 A. Triac 40 A per channel. Individual output channel protection via cut-off switches. Selectable individual ramp level for each type of channel. Record mode for sequences and scenes. Storage of last DMX data. DMX 512 input and output via 3 pin XLR male & female chassis plugs. Power supply: 200/250 V 50/60 Hz (internal switch selector). Single phase or three phase internally connected. Forced cooling by internal fan.

DisD4

This 4-output splitter/booster is available from now on as 19'' /2U unit, to widen its use for fixed installations in technical racks, as well as professional touring use. Its protections and isolation make this DISD4 model a very reliable tool you will almost forget in the DMX chain…

Technical Specifications:
4 channels DMX 512 signal amplifier, 4 amplified channels optoelectonically protected and isolated against voltage peaks. Input & outputs via male & female 3 pin XLR chassis plugs for DMX 512 signal. Power supply: 230V - 50Hz

CHAMAN

This intelligent DMX 512 fixtures controller is the model in the Indian style range able to easily control up to a dozen of moving heads or scanners from a variety of manufacturers, for a budget price. Its music triggered functions and programs turn it into a perfect animation interface for DJ or discotheque environments.

Technical Specifications:
DMX 512 lighting desk for intelligent projectors, 192 output channel circuit. 12 dedicated projectors. Maximum of 16 channels per projector. 30 banks of 8 scenes. 6 preset sequences. Fade time function. Black out / desk on function. 'Tap tempo' setting for musical tempo. Individual access to all parameters on each fixture. LCD screen display of all functions. Internal memory back up. Sound activated. Scene and sequence start with midi function. DMX 512 output via female 3 pin XLR chassis plug. Power supply: external power supply (DC 9V-12V, 220 mA)

DMX 512 standard, 1 channel strobe controller.
Logic mode: speed, flash length and sequence control. Dimmer mode: level control from 0 to 100 %. Stand-by/ run button. Audio mode: microphone sound activated PCB

This manual 8 output power dispatch is available with French plugs, or with universal EEC plugs for export market. This is a classic Indian style model, with total reliability.

Technical Specifications:
8 channel manual power dispatch. Total maximum load: 10 A (2300 W maximum on 230V). 8 On/Off toggle switches. Output channel switch display. Power output with EEC or French plugs. Front panel thermal circuit breaker protection.

TUTELO

This DMX 512 or MIDI controllable 4 channel power unit opens the orchestras, DJ, discomobile and bands markets for simple applications, thanks to its optional infrared remote control. This feature is easily extensible thanks to its optional extra sensor and extra cable, making the tutelo a complete and versatile compact lighting tool.

Technical Specifications:
4 channel DMX 512 & MIDI dimmer pack. 5 A per channel. Maximum loading 16 A. Possible use of every kind of load, resistive or inductive. 16 internal programs. Individual DMX address on each channel. Functions: manual dimmer, manual program, auto program. Functions activated via optional remote control. DMX 512 input & output via male and female 3 pin XLR connectors. 4 outputs via VDE chassis plugs.

AQUILA DMX

In the ever moving Blue Planets range, the future of these brilliant lighting effects relies in the DMX control and in the sheer creativity brought by precise DMX synchronization, and the use, in the Aquila model, of separated color wheel and gobo wheel. Rich saturated colors, and wide choice of gobos in a fast moving wheel boosts ideally the warm beam created by an efficient ELC lamp and good quality lenses. The internal programs and music mode, allow stand alone use. But DMX network only will give full power to this brilliant compact scanner, very promising for the future of the Blue Planets range.

VEGA DMX

A logical evolution in the rich landscape of the Blue Planets, the Vega DMX provides every synchronized variation that a demanding user can expect from its 2 DMX channels and the lighting effects associated with the Star Way Vega name. Controlling the choice of the colored gobos and the speed of rotating make this new model, yet born from a Blue Planet classic, an obvious choice for every professional wishing to turn this show into a coordinated blitz of stunning and precise effects.

SPICA

Moving mirror projector.
Dual axis, multi-directional mirror movement. 9 position colored gobo wheel. Sound activated electronic PCB, with audio sensitivity adjustment. 2x 6.35 stereo jack chassis plugs for master/slave coupling. ELC 24V 250 W lamp

CRATER

88 beam-effect projector.
Both clock & counter clock rotation. Semi circle with 44x25 mm coloured lenses. 6 dichroic lenses. G6,35 ceramic soket for 2xBVM 300W 120V lamp. Reflector lamp. DC motor. PCB sound activated and microphone with sound level control. Cooling guaranteed via forced ventilation. Suspension yoke with locking position. Constructed in sheet steel body. Supplied with 1.5 m cable and plug (Lamp is not included).

COMET

30 beam-effect projector.
Both clock & counter clock rotation. Semi circle with 15 coloured lenses. G6,35 ceramic soket for 2xBVM 300W 120V lamp. Reflector lamp. DC motor. PCB sound activated and microphone with sound level control. Cooling guaranteed via forced ventilation. Suspension yoke with locking position. Constructed in sheet steel body. Supplied with 1.5 m cable and plug (Lamp is not included).

MOON 3

Moon flower effect.
Metal parabol constructed of circular mirror. DC motor. 3 position control: fixed and sound activated rotation. PCB sound activated and microphone with sound level control. G6,35 ceramic socket for BRL 50W 12V lamp. Cooling guaranteed via natural air circulation. Suspension yoke with locking position. Constructed in sheet steel body. Supplied with 1.5 m cable and plug (Lamp is not included).

VEGA

Multigobo effects projector.
Metal parabol constructed of circular crystal ball creating an effect of 20 patterns. 16 dichroic glass gobo. GX 5.3 ceramic socket for ELC 250W 24V lamp. DC motor. PCB sound activated and microphone with sound level control. Cooling guaranteed via forced ventilation. Suspension yoke with locking position. Constructed in sheet steel body. Supplied with 1.5 m cable and plug (Lamp is not included).

SIRIUS 1

20 beam effect sound activated.
10 blade shapes coloured lenses. G6,35 ceramic socket for 2xBVM 300W 120V lamp. DC motor. PCB sound activated and microphone with sound level control. Cooling guaranteed via forced ventilation. Suspension yoke with locking position. Constructed in sheet steel body. Supplied with 1.5 m cable and plug (Lamp is not included).

SIRIUS 2

40 beam effect sound activated.
20 blade shapes coloured lenses. G6,35 ceramic socket for 2xBVM 300W 120V lamp. DC motor. PCB sound activated and microphone with sound level control. Cooling guaranteed via forced ventilation. Suspension yoke with locking position. Constructed in sheet steel body. Supplied with 1.5 m cable and plug (Lamp is not included).

STARFLASH

Decorative indoor/outdoor flash generator.
Power: 15W. 0.5 m power supply cable with B22 socket. Crystal dome and plastic mould parts constructed. Standard equipment: 1 flash tube.

FIREFLY

Medium power stroboscope.
Power: 60W. Flash speed: from 2 to 14 Hz. Built-in speed control via external potentiometer. Aluminium parabolic reflector. Plexiglas tube protection. 1.5m power supply cable. Construction: sheet steel body. Standard equipment: 1 strobe tube.

DANCE STROBE 2

Medium power stroboscope.
Power: 45W. Flash speed: from 2 to 15 Hz. Speed control potentiometer. External control input with 6.35 jack. Aluminium parabolic reflector. 1 m power supply cable. Construction: moulded plastic body and crystal Plexiglas interchangeable dome. Standard equipment: 1 strobe tube.

DANCE STROBE 3 DMX

High power stroboscope.
Power: 100W. Flash speed, sequence level control and flash length control. DMX input and output with 3 pin XLR connector. Aluminium parabolic reflector. 1 m power supply cable. Construction: moulded plastic body and crystal Plexiglas interchangeable dome. Standard equipment: 1 strobe tube.

SUPERFLASH 3 DMX

Very high power stroboscope.
Power: 1500W. Flash speed: frequency control from 1 to 13 Hz. Sequence from 0 to 100%. DMX control input and output with 3 pin XLR connector. Aluminium reflector. 1 m power supply cable. Construction: housing in moulded plastic and steel panels. Suspension yoke with position locking. Standard equipment: 1 strobe tube.

UV LITE 20

Blacklight 20 W.
Aluminium reflector. G13 socket for 20W tube. Two independent suspension yokes. Supplied with tube.

UV LITE 40

Blacklight 40 W.
Aluminium reflector. G13 socket for 40W tube. Two independent suspension yokes. Supplied with tube.

BLUELITE 20

Blacklight 20 W.
Symmetrical Aluminium reflector. Projection angle 105°. G13 socket for 20W tube. Two independent suspension yokes. Wire-mesh tube protection. Supplied without tube.

BLUELITE 40

Blacklight 40 W.
Symmetrical Aluminium reflector. Projection angle 105°. G13 socket for 40W tube. Two independent suspension yokes. Wire-mesh tube protection. Supplied without tube.

BLUELITE 400

Blacklight 400 W.
Aluminium reflector. Projection angle 105°. E40 socket for 400W lamp. Internal power supply. Two independent suspension yokes. Wire-mesh lamp protection. Supplied without lamp.

BLUEGUN 400

Projector for 400 W blacklight lamp.
Aluminium reflector. E40 socket for 400W lamp. Internal power supply. Two independent suspension yokes. Supplied without lamp.

TRUSSKOLOR

The TrussKolor fits perfectly in the heart of a classic 300 mm truss straight. Thanks to its triangular shape, its 3 dichroic MR16 lamps ideally reflect all kinds of additive color mixing hues, either in rhythm or softly DMX controlled

Technical Specifications:
DMX 512 color changer, 3 control channels for 3 MR16 lamps fitted with RVB dichroic filters. Stand alone and integrated Master/Slave modes. DMX 512 input and output thru XLR 3 pin chassis plugs. Direct mains power supply: 230V - 50Hz

PARKOLOR

The ParKolor combines the mostly popular power of 3 HPL 575 lamps with 3 dichroic RGB filters, in a classic PAR 64 ergonomic housing. A Par WFL front lens gives a perfect and even light field, even at short distance.

Technical Specifications:
DMX 512 color changer, 3 control channels for 3 HPL 575 lamps fitted with RVB dichroic filters. Stand alone and integrated Master/Slave modes. DMX 512 input and output thru XLR 3 pin chassis plugs. Direct mains power supply: 230V - 50Hz

MULTIPAR

Lighting fixture with interchangeable lens.
Ceramic socket G9.5 for 575 W HPL lamp, 4 lenses to obtain different angles (Lens type: VNSP, NSP, MFL, WFL). 360° adjustable par-safe device. Color filter compartment fitted with clip. Aluminium moulded body includes Color filter and one lens. Finish: black, polished aluminium, chromed, gold or antic copper. Lamp is not included.

PARLITE

Professionals PAR projectors
Construction: aluminium body, reinforcement for good rigidity with ribbing on front section. StarWay side handle.

Parlite 16
GX 5.3 ceramic socket for MR16 lamp. Models: black painted or polished aluminium. Supplied with lamp holder, without lamp.

Parlite 20
E27 ceramic socket. Models: black painted or polished aluminium. Supplied with lamp holder, without lamp.

Parlite 30
E27 ceramic socket. Models: black painted or polished aluminium. Supplied with lamp holder, without lamp.

Parlite 56
GX 16D ceramic socket. Models: black or polished aluminium. Parsafe lamp orientation handle. Supplied with lamp holder, without lamp.

Parlite 64
GX 16D ceramic socket. Models: black or polished aluminium. Parsafe lamp orientation handle. Supplied with lamp holder, without lamp.

FOCO 56

Short PAR 56 projector
Ceramic lampholder GX16D for 300W lamp. Cooling by natural air flow through vents. Finish black or silver. Supplied without lamp.

THEALITE 500

Thealite 300/500 W stage projector.
Pebble convex lens ? 120mm or fresnel lens ? 120mm. Aluminium reflector. GY9.5 ceramic socket for 300 or 500 W lamp. Angle 10? to 40?. Two accessory compartments. Construction: extruded aluminium and sheet steel body. Filter frame included. Lamp not included. Supplied with cable

THEALITE 1000

Thealite 650/1000 W stage projector.
Pebble convex lens ? 150mm or fresnel lens ? 520mm. Aluminium spherical reflector. GY9.5 ceramic socket for 650 or 1000 W lamp. Focal length control beneath spotlight. Two accessory compartments. Construction: extruded aluminium and sheet steel body. Filter frame included. Lamp not included. Supplied with cable

BLINDLITE 4

Professional blinder, base type- screw.
Unit uses 4 lamps DWE 120V 650W. Adjustable light beam (2 modules for 2 lamps). Polished aluminium body construction. Lamps are not included. Supplied with cable

BLINDLITE 8

Professional blinder, base type- screw.
Unit uses 8 lamps DWE 120V 650W. Adjustable light beam (2 modules for 4 lamps). Polished aluminium body construction. Lamps are not included. Supplied with cable

ROTOLITE XL

Coloured gyrophare.
Rotating speed 90 rpm, aluminium reflector. Supplied with lamp 75W. a colours available: Amber, blue, green and red.

TANGO BALLS

Mirror ball from 5 cm to 1m. 10x10 mm glass facet
Tango ball 2: ? 5 cm, weight (Kg): 0.1
Tango ball 4: ? 10 cm, weight (Kg): 0.2
Tango ball 6: ? 15 cm, weight (Kg): 0.5
Tango ball 8: ? 20 cm, weight (Kg): 0.8
Tango ball 12: ? 30 cm, weight (Kg): 1.8
Tango ball 16: ? 40 cm, weight (Kg): 2.8
Tango ball 20: ? 50 cm, weight (Kg): 4.5
Tango ball 30: ? 75 cm, weight (Kg): 9.0
Tango ball 40: ? 100 cm, weight (Kg): 15.0

TANGO ROTATORS

Tango rotator battery:
Battery DC motor for tango ball. Rotation speed 0.5 rpm. Maximum load 5Kg

Tango Rotator 16 & 20:
220V AC motor for tango ball. Rotation speed 0.5 rpm. Maximum load 6Kg

Tango Rotator 220:
220V AC motor for tango ball. Rotation speed 0.5 rpm. Maximum load 10Kg

Tango Rotator 30 & 40:
220V AC motor for tango ball. Rotation speed 0.5 rpm. Maximum load 20Kg

ALU STAND 361

3.65m aluminium stand for projectors.
Adjustable height: 150/365 cm. Maximum loading 50 Kg. Delivered with T bar for 8 units

ALU STAND 362

3.65m aluminium stand for projectors.
Adjustable height: 150/365 cm. Maximum loading 50 Kg. Delivered with 2 T bar

ALU TRUSS 272

3.0m aluminium truss.
Adjustable height: 190/310 cm. Maximum loading 90 Kg. Delivered with 2 T bar for 8 units

METAL PANELS

Mod: 1U without vent hole, or with vent hole.
Mod: 2U without vent hole, or with vent hole.
Mod: 3U without vent hole, or with vent hole.

CLAMPS

E-Clamp 876
Professional hook clamp with counter flange for a 50mm diameter tube.

E-Clamp 878
Professional hook clamp with counter flange for a 50mm diameter tube.

SAFETY CABLES

Safety cable
Construction steel cable without sheath

Safety cable PVC
Construction steel cable with PVC sheath

PUFFER 1

700 W compact smoke generator.
Special blended fluid required. Aluminium heating element. Power 700 W. Preheat time 5 mn. Maximum output 100 m3 / mn. Tank capacity, 1 liter. Equipment: 1 remote control with cord. Supplied with 1.5 m cable and plug.

PUFFER 2

1000 W compact smoke generator.
Special blended fluid required. Aluminium heating element. Power 1000 W. Preheat time 5 minutes. Maximum output 300 m3 / mn. Tank capacity, 1,5 liters. Equipment: 1 remote control with cord. Supplied with 1.5 m cable and plug.

PUFFER 6

1500 W DMX 512 smoke generator.
Special blended fluid required. Aluminium heating element. Power 1500 W. Preheat time 12 minutes. Maximum output 800 m3 / mn. Tank capacity, 5 liters. DMX 512. Equipment: 1 LCD remote control with timer. Supplied with 1.5 m cable and plug.

PUFFER 8

3000 W DMX 512 smoke generator.
Special blended fluid required. Aluminium heating element. Power 3000 W. Preheat time 12 minutes. Maximum output 1200 m3 / mn. Tank capacity, 5 liters. DMX 512. Equipment: 1 LCD remote control with timer. Supplied with 1.5 m cable and plug.

FLUBBLE ONE

Compact bubble machine.
Special blended fluid required. Bubble generated via internal turbine. Maximum continuous bubble emission time: unlimited. Tank capacity, 0,5 liter. Supplied with 0.75 m power supply cable and plug.

STEAMER ONE

700 W compact haze generator.
Special blended fluid required. Aluminium heating element. Power 700 W. Preheat time 5 minutes. Continuous smoke emission time: unlimited. Maximum output 75 m3 / mn. Tank capacity, 1,5 liters. Equipment: 1 remote control with timer. Supplied with 1.5 m power cable and plug.

FLUIDS

Steamer Fluid
Specialized fluid for haze machine. Steamer fluid, suitable for Steamer one and all other haze generators. Application: indoor or outdoor. Available in 5 liters tanks

Puffer Fluid Low Density
Low density fog fluid suitable for Star Way puffer series and all other smoke generators. Light Haze effect and rapid dispersion. Recommended enhancing beams of light. Available in 5 liters tanks

Puffer Fluid Standard
Regular fog fluid suitable for Star Way puffer series and all other smoke generators. Medium time dispersion. Available in 5 liters tanks

Puffer Fluid High Density
High Density fog fluid suitable for Star Way puffer series and all other smoke generators. White fog effect. Low time dispersion. Available in 5 liters tanks

Flubble Fluid
Specialized fluid for bubble machine. Suitable for Flubble One and all other Bubbles machines. Application: indoor or outdoor. Available in 5 liters tanks